LidLite is a direct fit with Pelican 1510, 1535 Air, and 1560.

Yes, it does fit with some lid organizers. Due to there being many manufacturers of organizers, we cannot guarantee it will fit with every Lid Organizer. Some older lid organizers have a taller profile, making the holes misalign by around 2mm. A simple hole punched through the plastic of the organizer backing can solve this issue. The plastic is thin enough so any knife or sharp screw driver can accomplish this. It does work with Colorcase brand Lid Organizers.

The easiest way to install a LidLite is to mount the center hole first, but not completely tight. This will allow you to align the outer mounting points. Once you have all three screws started, you can then secure them to a snug fitment. If you are mounting with a lid organizer: the LidLite will mount behind the Lid Organizer. Once again, it is easiest to put the screw through the center hole of the Lid Organizer first, then through the center hole of the LidLite. Once you have these both on the single screw, you can then mount it to the center hole of the Pelican Lid. Once again, do not tighten all the way, so you are able to adjust the LidLite and Organizer side to side to line up the exterior holes.

Pass through charging enables the LidLite to be used as a light while charging the battery at the same time.

The LidLite can charge with any USB to USB C cable. It has internal charge controlling to regulate the power coming from different sized charging blocks.

No. LidLite does not have a waterproof rating. But your Pelican does!